The normal chess startup position is automatically detected by Chessbase. However, if you have a different position on the board and you want Chessbase to start from this position you have to lift both kings and put them back on the same position on the board. To determine which color has the move, place that king back as last on the board.
You have a position on the board and white is to move: lift both kings, put the black king on the board, put the white king on the board.
You have a position on the board and black is to move: lift both kings, put the white king on the board, put the black king on the board.
Once this is done, all moves played on the board are now registered by Chessbase.
Please keep in mind that there might be positions on the board that will not recognise your move. E.g. the black king is in check and you want to move a different move that does not solve the check. Chessbase does not show anything at that moment.
In Fritz you can setup a position in the same way.
Remark: to make this work you have to enable "Start/Stop setup" in the extra tab of the RabbitPlugin:
Nenhum comentário:
Postar um comentário